AudioControl D-6.1200 6-Channel Car Amplifier with Digital Signal Processing Stinger Off-Road

Overview

Description

Introducing the AudioControl D-6.1200 – the ultimate 6-channel car amplifier that will revolutionize your audio experience on the road. With a massive power output of 125 watts RMS x 6 at 4 ohms and 200 watts RMS x 6 at 2 ohms, this amplifier delivers exceptional sound quality and clarity that will blow you away.

But that’s not all – the D-6.1200 also features cutting-edge digital signal processing (DSP) technology, which allows you to fine-tune and customize your sound to perfection. With all controls and adjustments made via the AudioControl Smart-User DSP app on your laptop (PC or Mac) through a USB connection, you have complete control over your audio system like never before.

Whether you’re a music enthusiast or a professional audiophile, the D-6.1200 is designed to meet all your needs and exceed your expectations. With its sleek and modern design, this amplifier is not only functional but also aesthetically pleasing, making it a perfect addition to any car audio system.

So why settle for average sound quality when you can experience the power and precision of the AudioControl D-6.1200? Upgrade your car audio system today and take your listening experience to the next level!

Features

• Maximum Input Level Control (MILC): The amplifier analyzes the input signal to detect any clipping. If the signal reaches the level of clipping, the MILC Source Clip LED glows red, prompting you to turn down the gain level. When the gain level is maximized, a green Maximized LED will glow to indicate the gain, for that set of channels, is set to the optimum level.

• GTO (Great Turn On) Signal Sense: If you are connecting the amplifier to a factory stereo, or an aftermarket unit without preamp outputs and a remote turn-on lead, the GTO Signal Sense circuitry can turn on the amplifier when an audio signal is detected on either the line-level or speaker-level inputs. After a period of time with no signal input, the amp will turn itself off.

• ACR-3 Remote: The optional AudioControl ACR-3 wired remote is a dual-function remote that lets you adjust both the level of the main and line outputs, as well as recalling memory presets, all from the driver’s seat. The ACR-3 has two LED indicators and a rotary/push-knob. When the blue LED is on, the remote knob raises and lowers the output level. When the knob is pushed in, the red LED will light, allowing the knob to recall memory presets when turned. You can further configure the operation of the ACR-3 in the Digital Signal Processor software.

• Top Panel: The D-6.1200 has a removable top panel that allows you to view numerous LED indicators during setup, and the on/off switch for the GTO (Great Turn-On) Signal Sense function. The LED indicators include:

  • Power: The Power LED illuminates in green when the amplifier is powered on and is operating normally. In addition, blue LEDs inside the unit will glow in a particular pattern during power up, reset boot, or if protection is activated.
  • Protection: The Protection LED will flash in the event of a short circuit (one time or repeated), Under Voltage, Over Voltage, DC Offset, or Thermal Overload in the heatsink or at the transformer. The amp has built-in diagnostic codes indicated by a particular flashing pattern, telling you exactly where the problem has occurred. A chart of the protection diagnostic codes is provided in the Quick Start Guide.
  • Communications LED: This LED lights when there is USB activity between the amp and your computer during set up.
  • MILC Source Clip LED: The MILC (Maximum Input Level Control) level-setting circuit prevents clipping and distortion. It calculates when the waveform of an incoming signal on input 1 or 2 is clipping and lights this LED. The level of the incoming signal should be set just prior to MILC LED coming on.
  • Maximized Input LEDs: These LEDs illuminate when a maximum audio signal is present on any of the analog audio inputs. Signal levels should be lowered if these LEDs are on a lot. Three LEDs are provided, labeled Front, Rear, and Sub.
  • Maximized Output LEDs: These LEDs illuminate when there is maximum signal present on any of the audio outputs. Signal levels should be lowered if these LEDs are on a lot. Four LEDs are provided: Outputs 1/2, 3/4, 5/6, and Line Out.

• Connections: The D-6.1200’s connections are aligned along the front of the amplifier for ease of installation. The amp’s connections include:

  • Fuses: Three 40A ATO blade-type fuses are installed in the amplifier.
  • Power: Set-screw terminals are provided for connecting +12V Power, Ground, and Remote In. The Power and Ground terminals will accept up to 1/0-gauge wire, however, the recommended wire size is between 4 and 1/0 AWG. The Remote In terminal accepts up to 8-gauge. A 120A fuse should be placed on the power wire, no more than 18″ from the battery.
  • Line Level Inputs: Three pairs of RCA jacks are provided for connecting the amp to the source unit via RCA cables.
  • Line Level Output: One pair of RCA jacks for feeding the signal to another amplifier. The maximum output is 8.5V RMS.
  • Speaker Level Inputs: Four sets of removable Phoenix (or Euroblock) connectors are provided for connecting the source unit via speaker-level input. The connectors are labeled 1-2, 3-4, 5-6, and Front High (for tweeters).
  • ACR-3 Control: This RJ-14 telephone-type connection allows you to plug in the optional ACR-3 Remote. The ACR-3 is used to change the output level and for recalling memory presets.
  • USB: A micro-USB (Type-B) is used for connection to a computer for DSP configuration. A 2-meter USB cable is provided.
  • Speaker Output: Three removable Phoenix connectors are provided for connecting speaker wire. The amplifier will accept a load impedance of 2Ω or higher in stereo (4Ω or higher when bridged).
  • Option Port: A multi-pin input is provided for connecting a future optional AudioControl Bluetooth adapter for streaming audio into channels 7 and 8 from your Bluetooth-enabled devices. No other details are provided by the manufacturer.

What’s in the Box

• 6-Channel amplifier
• Three 40A ATO fuses (installed)
• 2 Meter (6.5′) USB 2.0 cable (Type A USB on one end / Micro-B USB on other end)
• 2.5mm Allen wrench
• User Guide 

Specifications

RMS Power Output	125 Watts x 6
Power at 2 Ohms	200 Watts x 6
Bridged Power	400 Watts x 3
Minimum Impedance	2 ohms
Frequency Response	10Hz – 30kHz
Signal-to-Noise Ratio	102 dB
THD	0.01%
Input Voltage	14.4v
Low-Pass Crossover Frequency	25Hz-20kHz (DSP)
High-Pass Crossover Frequency	25Hz-20kHz (DSP)
Width	11.94″
Height	2.13″
Depth	8.06″

Support

Find the answers to many common questions:

 

*********************************

Warranty Information

We have a 30-day easy return policy for all purchases. 

We provide a shipping label for defective products upon your return request at absolutely no cost to you. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.

Stinger Off-Road products are warrantied against defects in materials One (1) Year from purchase date. Stinger Off-Road will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.

Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.

Note: Products purchased from unauthorized dealers are not covered under warranty.

Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.