AudioControl ACM-2.300 2-Channel Micro Amplifier Stinger Off-Road

Overview

Description

The AudioControl ACM-2.300 2-Channel Micro Amplifier is the ultimate solution for car audio enthusiasts who demand superior sound quality and exceptional performance. With its powerful output of 75-Watts RMS x 2 at 4 ohms and an impressive 150-Watts RMS x 2 at 2 ohms, this amplifier delivers a crisp and clear sound that is unmatched by its competitors.

Equipped with state-of-the-art Class D amplifier technology, the ACM-2.300 produces a precise and detailed sound that will take your music experience to a whole new level. Its compact design and easy installation make it the perfect addition to any car audio setup, providing a powerful boost to your music wherever you go.

The GTO™ signal-sensing turn-on with speaker-level input is one of the most innovative features of the ACM-2.300. This feature automatically turns the amplifier on and off based on the presence of an audio signal, eliminating the need for a remote turn-on wire. This makes installation even easier, saving you time and effort.

Overall, the AudioControl ACM-2.300 2-Channel Micro Amplifier is an exceptional choice for anyone who values high-quality sound in their car audio setup. With its advanced Class D amplifier technology, impressive power output, and GTO™ signal-sensing turn-on with speaker-level input, this amplifier delivers an outstanding sound quality that will enhance your music experience. So why settle for anything less when you can have the best with the ACM-2.300 from AudioControl?

Features

• Power Output: The ACM-2.300 has the following output:

  • 75 watts RMS x 2 at 4Ω
  • 150 watts RMS x 2 at 2Ω
  • 300 watts RMS x 1 at 4Ω bridged

• Subsonic Filter: The AudioControl ACM-2.300 has a full-time 32 Hz subsonic filter. Filtering out super-low frequencies that typically cannot be cleanly reproduced by car speakers saves amplifier power and reduces distortion.

• Controls: The ACM-2.300’s controls are located under a removable protective panel. A small Phillips screwdriver (not supplied) is needed for removing the panel during setup. A slot-head screwdriver (not included) is needed to adjust the rotary controls. The amp’s controls are as follows:

  • GTO (Great Turn On) Signal Sense: If you are connecting the amplifier to a factory stereo, or an aftermarket unit without preamp outputs and a remote turn-on lead, you can set the GTO Signal Sense to “On” and the amplifier will turn on when an audio signal is detected on the line-level or speaker-level inputs. After a period of time with no signal input, the amp will turn itself off.
  • High Pass Crossover Frequency: A 3-way switch lets you set the cutoff frequency of the Linkwitz-Riley High Pass Crossover: 80Hz, Bypass, or 120Hz.
  • Gain: This rotary gain control adjusts the overall output of the amplifier. An LED next to the dial will glow when the gain has been maximized for optimum performance.

• Connections: The ACM-2.300’s connections are aligned along the front of the amplifier for ease of installation. The amp’s connections include:

  • Fuse: One 30A ATO blade-type fuse is installed in the amplifier.
  • Power: Set-screw terminals are provided for connecting +12V Power, Ground, and Remote In. The set screws can be tightened/loosened with a Phillips-head screwdriver (not included). The Power and Ground terminals will accept up to 8-gauge wire, while the Remote In terminal accepts up to 6-gauge. A 30A fuse should be placed in-line on the power wire, no more than 18″ from the battery.
  • Line Level Inputs: One pair of RCA jacks is provided for connecting the amp to the source unit via an RCA cable.
  • Speaker Level Input: One removable Phoenix (or Euroblock) connector is provided for connecting the source unit via speaker-level input. The speaker wires are inserted into the connector and tightened with a screwdriver (5/64″ Precision Phillips-head, not supplied).
  • Speaker Output: A removable Phoenix connector is provided for connecting speaker wire up to 12 gauge. The amplifier will accept a load impedance of 2Ω or higher, (or 4Ω if bridging). The speaker wires can be inserted into the connector and tightened with a screwdriver (9/64″ Precision Phillips-head, not supplied).

What’s in the Box

• 2-Channel amplifier with 30A ATO fuse installed
• User Guide 

Specifications

RMS Power Output	75 Watts x 2
Power at 2 Ohms	150 Watts x 2
Minimum Impedance	2 ohms
Frequency Response	10Hz – 30kHz
Signal-to-Noise Ratio	102 dB
THD	0.01%
Input Voltage	14.4v
High-Pass Crossover Frequency	80, 120 Hz

Support

Find the answers to many common questions:

 

*********************************

Warranty Information

We have a 30-day easy return policy for all purchases. 

We provide a shipping label for defective products upon your return request at absolutely no cost to you. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.

Stinger Off-Road products are warrantied against defects in materials One (1) Year from purchase date. Stinger Off-Road will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.

Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.

Note: Products purchased from unauthorized dealers are not covered under warranty.

Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.