AudioControl ACX-300.2 2-Channel Monoblock All Weather Amplifier Stinger Off-Road

Overview

Description

Attention all water-sport and adventure enthusiasts! Get ready to rock your world with the AudioControl ACX-300.2 2-Channel Monoblock All Weather Amplifier.

This sleek and powerful amplifier is built to handle anything Mother Nature can throw its way, making it the perfect companion for your next outdoor adventure. The rugged design and all-weather construction ensure that your music will keep pumping no matter what the elements have in store for you.

But that’s not all – the ACX-300.2 packs a serious punch with its 2-channel mono setup. You’ll enjoy the kind of powerful, high-quality sound that you deserve, with every note delivered in perfect clarity.

And with its compact size and stylish design, this amplifier will make you the envy of everyone at the beach or on the water. With its striking black finish and sleek lines, the ACX-300.2 is as much a work of art as it is a powerhouse of sound.

So if you’re looking to take your water-sport or outdoor adventure to the next level, don’t settle for less. The AudioControl ACX-300.2 2-Channel Monoblock All Weather Amplifier is the only choice. Get yours today and get ready to rock!

Features

• High-/Low-Level Inputs: The ACX-300.2 includes two built-in 12″ RCA inputs that can accept either high- or low-level input signals. If running high-level signals, RCA to speaker-wire adapters must be used (sold separately), or the RCA connectors must be cut off and the bare-ended wire used.

  • Low-Level Input Range: 500mV – 6Vrms
  • High-Level Input Range: 1Vrms – 12Vrms

• AccuBASS: The patented AccuBASS processing circuit compensates for factory bass rolloff to improve bass performance, especially with most factory installed sound systems. The circuit has two rotary controls: the Threshold lets you dial in the level at which the AccuBASS will begin to work, and a Level control that adjusts the amount of AccuBASS compensation.

• Crossovers: The ACX-300.2 includes a 12 dB/octave Linkwitz-Riley low-pass filter with a 3-position switch to change the crossover point. Choices include 80Hz, 120Hz, or Bypass.

• Gain Maximized LEDs: The mono amp’s inputs include a Gain control to the properly set the overall output level. A Maximized LED indicator will light to let you know when the output signal has reached its optimum performance level, helping to avoid running a distorted signal to your speakers.

• GTO (Great Turn On) Signal Sense: If you are connecting the amplifier to a factory stereo, or an aftermarket unit without preamp outputs and a remote turn-on lead, the GTO Signal Sense circuitry can turn on the amplifier when an audio signal is detected on either the line-level or speaker-level inputs. After a period of time with no signal input, the amp will turn itself off.

• Optional Wired Remote Control: The ACX-300.2 amplifier features a female 3.5mm jack on a built-in 12″ harness, letting you connect an optional ACR-1 wired remote control (sold separately). A 16.5′ ACR-1 connection cable is provided, with a male 3.5mm connector on one end and an RJ-14 connector on the other end, that connects to the wired controller.

• All-Weather Construction: The ACX-300.2 amp has been constructed to withstand outdoor environments and carries an IPX6 waterproof rating, making it impervious to weather. A removable cover-plate on top of the amp protects the controls and LED indicators from dust and moisture ingress. The cover-plate screws require a 2.5mm hex bit for removal (not included). All wire harnesses on the amp are built-in for added weather resistance:

• Audio Inputs: Two RCA jacks on 12″ input cables are provided, each with protective plastic caps.
• Speaker Output: A 12″ 2-pin speaker-wire output is terminated in a waterproof connector, and includes a matching 7″ harness with bare-ended wire.
• Power/Ground/Remote: A 12″ section of 10ga. power and ground wire terminates in a waterproof connector, with matching 7″ harness and bare-ended wire. An additional empty power/ground connector is provided, letting you build your own harness to match the amp’s power/ground connector. A bare-ended 12″, 18ga. remote turn-on wire is provided in the power/ground harness.
• Mounting: The AudioControl ACX-300.2 features built-in mounting flanges on either end of the amp, with two pre-drilled holes in each, allowing the amp to be mounted in a variety of locations. Four 3/4″ screws are provided for mounting.

What’s In The Box

• Monoblock amplifier 
• User Guide 

Specifications

Power Output (RMS)	2×75 Watts @ 4 Ohms 2×150 Watts @ 2 Ohms 1×300 Watts @ 4 Ohms Bridged
Frequency Response	26 Hz – 22 kHz
Power / Ground Wire Gauge	Between 8 and 4 AWG
Recommended fuse rating	30 Amps
Frequency Response	26Hz – 22kHz
Signal-to-Noise Ratio	102dBA, Ref 50W @ 4Ω
THD+N	<0.05%
Crossover	12dB/octave Linkwitz-Riley, 80Hz/120Hz/Bypass
Weather-Proof Rating	IPX6
Line/Speaker-Level Inputs	500mV – 6V/1V – 12VRMS
Width	8.89”
Height	2.36”
Depth	3.86”
Weight	3.15 lbs

Support

Find the answers to many common questions:

 

*********************************

Warranty Information

We have a 30-day easy return policy for all purchases. 

We provide a shipping label for defective products upon your return request at absolutely no cost to you. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.

Stinger Off-Road products are warrantied against defects in materials One (1) Year from purchase date. Stinger Off-Road will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.

Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.

Note: Products purchased from unauthorized dealers are not covered under warranty.

Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.