Jeep Wrangler JK (2007-2010) HEIGH10 10″ Radio Kit Stinger Off-Road

GENERAL

Model Number	STH10JKB
Mounting Design	Single Din
Recording Resolution	1024 x 600
Screen Size	10″
Manufacturer’s Warranty	1 year
Operating Voltage	9.0VDC to 18VDC
Grounding system	Negative Ground
Max Current Consumption	10A fused

DIMENSIONS

Radio Module	178 mm x100 mm x 116 mm (W x H x D)
Display	247.2 mm x 180.6 mm x 48.5 mm (W x H x D)

DISPLAY

Diagonal	10 inch
Aspect Ratio	16:9
Resolution	1024 x 600
Pixels	1,843,200
Active Area	222.72 (W) x 125.28 (H) mm
Operating Temperature	(C) -20° to 70°

AUDIO

Load Impedance	4Ω nominal / 2Ω allowable
Continuous Power Output	25W x 4ch/4Ω 20Hz to 20KHz, 1%THD at 14.4V
Audio output level (max)	4.0V pre-out
EQ	(15-band) 25Hz/40Hz/63Hz/100Hz/160Hz/250Hz/400Hz/ 630Hz/1KHz/1.6KHz/2.5KHz/4KHz/6.3KHz/10KHz/16KHz
Gain	±12dB (2dB/step)
HPF	25Hz/40Hz/63Hz/80Hz/100Hz/ 160Hz/250Hz
Slope	6dB, 12dB, 18dB
Subwoofer Preout LPF	25Hz/40Hz/63Hz/80Hz/100Hz/ 160Hz/250Hz
Slope	6dB, 12dB, 18dB
Gain	-14dB to 7dB (1dB/step)
Phase	0 or 180
Speaker Level	±9dB (1dB/step)
Time Alignment	0 to 133 step (inch/ms)

FM TUNER

87.9MHz to 107.9MHz

Usable sensitive 0dB (mono S/N: 30dB)

SNR: 65dB

AM TUNER

530KHz to 1710KHz

Usable sensitive 0dB (mono S/N:20dB)

SNR 58dB

New Firmware

Click Here To Download HEIGH10 (UN1810) Firmware
For All Installations NOT Using PAC Vehicle-Specific Integration Kit

Click Here To Download HEIGH10 (UN1810) Firmware
For Units Installed Using PAC SRK-JW18EH, SRK-CHR15H, SRK-RAM13H, SR-JK11H, SR-GM14H, SR-TAC15H, SR-TUN14H

Click Here To Download HEIGH10 (UN1810) Firmware
For Units Installed Using PAC SRK-JK11H And CH1AKIT Integration Kits

Release Notes:

• Adds AHD Camera compatibility (UN1810 HW REV 2.1.6.2 and higher)
• Adds onscreen RGB Light Control for Stinger ENLIGHT10 products.
• Adds compatibility for new hardware revisions.*

*Firmware is backwards compatible for older hardware versions.

Support Documents for Download:

How to verify AHD Camera compatibility on HEIGH10 (UN1810)

How to activate RGB Light Control on HEIGH10 (UN1810)

CLICK HERE FOR A VIDEO WALK-THROUGH ON HOW TO UPDATE YOUR HEIGH10 FIRMWARE

CLICK FOR INSTRUCTIONS ON HOW TO UPDATE YOUR HEIGH10’S FIRMWARE

Support

Find the answers to many common questions:

 

*********************************

Warranty Information

We have a 30-day easy return policy for all purchases. 

We provide a shipping label for defective products upon your return request at absolutely no cost to you. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.

Stinger Off-Road products are warrantied against defects in materials One (1) Year from purchase date. Stinger Off-Road will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.

Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.

Note: Products purchased from unauthorized dealers are not covered under warranty.

Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.